Filter
Top Products
98 | Dell SonicWALL WXA 1.3 User’s Guide
Configuring WFS Acceleration Using Unsigned SMB
To configure the WFS Acceleration service using Unsigned SMB, perform the following:
Step 1 Permit acceleration for the relevant VPN or routed policies in the Network > Routing or VPN
> Settings pages in the SonicOS management interface.
Step 2 Configure a network interface on the NSA/TZ series appliance for the port you want to connect
the WXA series appliance to. The WXA series appliance must be connected to a NSA or TZ
series appliance on a port other than X0 and X1. See Configuring Network Interfaces on
page 33 for details.
Step 3 Navigate to the WAN Acceleration > WFS Acceleration page.
Step 4 Click the Configuration tab, and then select the Enable WFS Acceleration checkbox.
Step 5 Select the Unsigned SMB checkbox.
Step 6 Click the Apply Changes button.