Filter
Top Products
Configuring TCP Acceleration | 53
Configure Routing Policies for Incoming Traffic
On the central site, configure a routing policy for incoming traffic from the branch site. On the
branch site, configure a routing policy for incoming traffic from the central site.
The steps in this section are an example of configuring a routing policy on the branch site, for
traffic coming from the central site (incoming):
Step 1 Navigate to the Network > Address Objects page.
Step 2 Click the Add button.
The Add Address Object Group pop-up window displays.
Step 3 Enter a name (Branch Site) for the address object in the Name text field.
Step 4 Click the Zone Assignment drop-down, select LAN.
Step 5 Click the Type drop-down, select Network.
Step 6 Enter the LAN IP address of the Branch Site (192.168.20.0) in the Network text field.
Step 7 Enter the netmask IP address (255.255.255.0) in the Netmask text field.
Step 8 Click the Add button.