Filter
Top Products
Viewing the WFS Acceleration Page | 81
Advanced Configuration Mode
Clicking the Advanced configuration mode radio button displays the Domain Details and
Shares tabs. All other tabs (Configuration, Statistics, and Tools) appear the same in both Basic
and Advanced configuration modes. For details on the Configuration, Statistics, and Tools tabs,
see the Basic Configuration Mode on page 67.
Caution Advanced configuration mode should only be used if you need to specifically define server
or share names. The preferred way to configure WFS Acceleration is to use the Basic
configuration mode.
While in the Domain Details or Shares tab, you can select the Basic radio button at any time,
directing you to the Signed SMB Setup Tab on page 71, if you wish to use the simplified
configuration procedure for the domain.
Note Servers configured in Advanced mode may not be visible in the WFS Acceleration >
Signed SMB Setup tab in Basic mode, due to the specific naming convention used in Basic
mode. However, the servers are still part of the configuration and file operations will still be
accelerated.
Name Description
Domain Details Tab Configures the WXA series appliance to match details of the domain it is joining.
This tab offers advanced configuration procedures for joining the domain. See the
Domain Details Tab, page 82 for details.
Shares Tab Configures the WXA series appliance to accelerate specific servers and shares.
Available only when using the Advanced configuration mode. See the Shares
Tab on page 91 for details.