Filter
Top Products
Configuring TCP Acceleration | 57
Example 2
To configure acceleration of only the HTTP web traffic, follow the steps below:
Step 1 Navigate to WAN Acceleration > TCP Acceleration.
Step 2 Select the Configuration tab.
Step 3 Click the Enable TCP Acceleration checkbox.
Step 4 Click the TCP Acceleration Mode drop-down, then select Only TCP Services Specified in
the Service Object.
Step 5 Click the TCP Acceleration Service Object drop-down, the select HTTP.
Step 6 Click the Address Object always excluded from TCP Acceleration drop-down, then select
None.
Step 7 Click the Apply Changes button.