Filter
Top Products
Configuring TCP Acceleration | 59
Verifying the TCP Acceleration Configuration
After you complete the TCP Acceleration configuration procedures, verify TCP Acceleration is
working by checking the TCP Acceleration > Statistics Tab.
Step 1 Navigate to the TCP Acceleration > Statistics Tab.
Step 2 View the statistics data and graphs to verify TCP Acceleration.
This indicates if the WXA series appliance is using TCP Acceleration for data transfer.
If the Statistics tab data and graphs do not display any information, TCP traffic is not being
accelerated. The TCP Acceleration feature is not configured correctly or is disabled.
Refer to the Configuring the TCP Acceleration > Configuration Tab on page 56 and check the
TCP Acceleration configuration.