Filter
Top Products
160 | Dell SonicWALL WXA 1.3 User’s Guide
• If the WXA appliance is not connected to a Dell SonicWALL NGFW, the WXAC tab will not
display in the NetExtender management interface.
• A link to install the WXAC will display on the NetExtender WXAC tab if WXAC is licensed
and enabled on the managing NSA/TZ series appliance, but not yet installed on the client
side.
• If the WXAC is disabled or not supported at the central site, the WXAC tab will not display
in the NetExtender Client on the remote PC.
Enabling WXAC on the Central Site
The NetExtender WXAC is used on remote PCs connecting to a central site. At the central site,
the Administrator has to allow those NetExtender WAN Acceleration Clients to connect to the
central site (location of the WXA, managing NSA/TZ, and server).
Please do the following to enable/allow WAN Acceleration Clients:
Activating the WXAC
Step 1 Login to the managing NSA/TZ series appliance.
Step 2 Navigate to the System > Licensing page.
Step 3 Scroll down to the Manage Security Services Online section, then click the link to Activate,
Upgrade, or Renew services.