Filter
Top Products
Example of the diag command (Standalone unit)
Dell#diag stack-unit 0 level0
Warning - diagnostic execution will cause multiple link flaps on the peer side
- advisable to shut directly connected ports
Proceed with Diags [confirm yes/no]: yes
FTOS#Dec 15 04:14:07: %MXL-10/40GbE:0 %DIAGAGT-6-DA_DIAG_STARTED: Starting
diags on stack unit 0
00:12:10 : System may take additional time for Driver Init.
00:12:10 : Approximate time to complete the Diags ... 6 Mins
00:13:53 : Diagnostic test results are stored on file: flash:/TestReport-
SU-0.txt
Diags completed... Rebooting the system now!!!
Dec 15 04:15:54: %MXL-10/40GbE:0 %DIAGAGT-6-DA_DIAG_DONE: Diags finished on
stack unit 0
syncing disks... 1 1 done
unmounting file systems...
unmounting /f10/flash (/dev/ld0e)...
unmounting /usr/pkg (/dev/ld0h)...
unmounting /usr (mfs:35)...
unmounting /lib (mfs:24)...
unmounting /f10 (mfs:21)...
unmounting /tmp (mfs:15)...
unmounting /kern (kernfs)...
unmounting / (/dev/md0a)... done
rebooting...
Example of theshow file flash:\\ command (Standalone Unit)
Dell#show file flash://TestReport-SU-0.txt
*******************************BLADE IOM
DIAGNOSTICS*******************************
Board : Blade IOM Dell Inc.
CPU Version : XLP3XX-A0
Stack Unit Board Temp : 49 Degree C
Stack Unit Number : 0
Board Serial Number : TW282981C80067
Board Type : Blade IOM Module
CPLD Revision : 0x6
Image Build Version : 9-4(0-89)
**************************** BLADE IOM LEVEL 0
DIAGNOSTICS*************************
Test 1 - Power Rail Status Test ..................................... PASS
Test 2.000 - OptMod: Power Status Test .............................. PASS
Test 2.001 - OptMod: Power Status Test .............................. PASS
Test 2 - OptMod: Power Status Test .................................. PASS
Test 3.000 - Board Temperarture Sensor Test ......................... PASS
Test 3.001 - Board Temperarture Sensor Test ......................... PASS
Test 3 - Board Temperarture Sensor Test ............................. PASS
Test 4 - RTC Presence Test .......................................... PASS
Test 5.000 - CPU Sdram Presence Test ............................... PASS
Test 6.000 - CPU Sdram Size Test ................................... PASS
diagBladeIOMUsbAAccessTest[238]: ERROR: No USB A device found
Test 7 - USB A Access Test .......................................... NOT
PRESENT
diagBladeIOMUsbAPresenceGet[267]: ERROR: No USB device found
diagBladeIOMUsbHostControllerAccessTest[608]: ERROR: No USB device detected.
Test 8 - Usb Host Controller Access Test ............................ NOT
298
Debugging and Diagnostics