Filter
Top Products
Status active, 2 – status
inactive
Layer 3 LAG does not include this support. SNMP trap works for the Layer 2 / Layer 3 / default mode LAG.
SNMPv2-MIB::sysUpTime.0 = Timeticks: (8500842) 23:36:48.42
SNMPv2-MIB::snmpTrapOID.0 = OID: IF-MIB::linkDown
IF-MIB::ifIndex.33865785 = INTEGER: 33865785
SNMPv2-SMI::enterprises.6027.3.1.1.4.1.2 = STRING: "OSTATE_DN: Changed
interface state to down: Gi 0/0"
2010-02-10 14:22:39 10.16.130.4 [10.16.130.4]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (8500842) 23:36:48.42
SNMPv2-MIB::snmpTrapOID.0 = OID: IF-MIB::linkDown
IF-MIB::ifIndex.1107755009 = INTEGER: 1107755009
SNMPv2-SMI::enterprises.6027.3.1.1.4.1.2 = STRING:
"OSTATE_DN: Changed
interface state to down: Po 1"
2010-02-10 14:22:40 10.16.130.4 [10.16.130.4]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (8500932) 23:36:49.32 SNMPv2-
MIB::snmpTrapOID.0 = OID:
IF-MIB::linkUp IF-MIB::ifIndex.33865785 = INTEGER: 33865785 SNMPv2-
SMI::enterprises.6027.3.1.1.4.1.2 =
STRING: "OSTATE_UP: Changed interface state to up: Gi 0/0"
2010-02-10 14:22:40 10.16.130.4 [10.16.130.4]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (8500934) 23:36:49.34 SNMPv2-
MIB::snmpTrapOID.0 = OID:
IF-MIB::linkUp IF-MIB::ifIndex.1107755009 = INTEGER: 1107755009
SNMPv2-SMI::enterprises.6027.3.1.1.4.1.2 = STRING:
"OSTATE_UP: Changed
interface state to up: Po 1"
BMP Functionality Using SNMP SET
To enable or disable BMP, use SNMP SET.
Table 66. List of BMP MIBS that have both read/write access
MIB Object OID Description
f10bmpMib .1.3.6.1.4.1.6027.3.23 NODE
bmpEntry .1.3.6.1.4.1.6027.3.23.1 NODE
bmpReloadType .1.3.6.1.4.1.6027.3.23.1.1 LEAF INTEGER
bmpAutoSave .1.3.6.1.4.1.6027.3.23.1.2 LEAF INTEGER
bmpConfigDownload .1.3.6.1.4.1.6027.3.23.1.3 LEAF INTEGER
bmpDhcpTimeout .1.3.6.1.4.1.6027.3.23.1.4 LEAF INTEGER
bmpRetryCount .1.3.6.1.4.1.6027.3.23.1.5 LEAF INTEGER
bmpUserDefinedString .1.3.6.1.4.1.6027.3.23.1.6 LEAF OCTET STRING
Simple Network Management Protocol (SNMP)
879