Filter
Top Products
PRESENT
Test 9 - SD Flash Access Test ....................................... PASS
Test 10.000 - Qsfp Plus Power Mode Test ............................. PASS
Test 10.001 - Qsfp Plus Power Mode Test ............................. PASS
Test 10 - Qsfp Plus Power Mode Test ................................. PASS
Test 11 - CPLD Presence Test ........................................ PASS
Test 12 - Flash Access Test ......................................... PASS
Test 13 - Board Revision Test ....................................... PASS
Test 14 - MGMT PHY Presence Test .................................... PASS
Test 15.000 - Optional Module Type Test ............................. PASS
Test 15.001 - Optional Module Type Test ............................. PASS
Test 15 - Optional Module Type Test ................................. PASS
Test 16.000 - Qsfp Plus Presence Test ............................... PASS
Test 16.001 - Qsfp Plus Presence Test ............................... PASS
Test 16 - Qsfp Plus Presence Test ................................... PASS
Test 17 - Cpu Type Detect Test ...................................... PASS
***************** BLADE IOM LEVEL 1
DIAGNOSTICS*************************************
Test 101 - RTC Function Test ........................................ PASS
Test 102 - RTC Rollover Test ........................................ PASS
Test 103 - GPIO Access Test ......................................... PASS
Test 104 - PSoC Access Test ......................................... PASS
Test 105 - PCIe BCM56846 Access Test ................................ PASS
Test 106 - CPU SDRAM Access Test .................................... PASS
Test 107 - CPU SDRAM Data Line Test ................................. PASS
Test 108 - CPU SDRAM Address Line Test .............................. PASS
diagBladeIOMUsbAPresenceGet[267]: ERROR: No USB device found
diagBladeIOMUsbFileCopyTest[92]: ERROR: No USB device detected.
Test 109 - Usb File Copy Stress Test ................................ NOT
PRESENT
Test 110 - Flash Rw Test ............................................ PASS
Test 111 - I2C Stress Test .......................................... PASS
Trace Logs
In addition to the syslog buffer, the Dell Networking OS buffers trace messages which are continuously
written by various software tasks to report hardware and software events and status information.
Each trace message provides the date, time, and name of the Dell Networking OS process. All messages
are stored in a ring buffer. You can save the messages to a file either manually or automatically after
failover.
Auto Save on Crash or Rollover
Exception information for MASTER or standby units is stored in the flash:/TRACE_LOG_DIR directory. This
directory contains files that save trace information when there has been a task crash or timeout.
• On a MASTER unit, you can reach the TRACE_LOG_DIR files by FTP or by using the show file
command from the flash://TRACE_LOG_DIR directory.
• On a Standby unit, you can reach the TRACE_LOG_DIR files only by using the show file command
from the
flash://TRACE_LOG_DIR directory.
NOTE: Non-management member units do not support this functionality.
Debugging and Diagnostics
299