Filter
Top Products
Auto-Command
You can configure the system through the RADIUS server to automatically execute a command when
you connect to a specific line.
The auto-command command is executed when the user is authenticated and before the prompt
appears to the user.
• Automatically execute a command.
auto-command
Setting Access to Privilege Levels through RADIUS
To configure a privilege level for the user to enter into when they connect to a session, use the following
command.
Configure a privilege level for the user to enter into when they connect to a session through the
RADIUS server.
privilege level
Configure this value on the client system.
Configuration Task List for RADIUS
To authenticate users using RADIUS, you must specify at least one RADIUS server so that the system can
communicate with and configure RADIUS as one of your authentication methods.
The following list includes the configuration tasks for RADIUS.
• Defining a AAA Method List to be Used for RADIUS (mandatory)
• Applying the Method List to Terminal Lines (mandatory except when using default lists)
• Specifying a RADIUS Server Host (mandatory)
• Setting Global Communication Parameters for all RADIUS Server Hosts (optional)
• Monitoring RADIUS (optional)
For a complete listing of all Dell Networking OS commands related to RADIUS, refer to the Security
chapter in the Dell Networking OS Command Reference Guide.
NOTE: RADIUS authentication and authorization are done in a single step. Hence, authorization
cannot be used independent of authentication. However, if you have configured RADIUS
authorization and have not configured authentication, a message is logged stating this. During
authorization, the next method in the list (if present) is used, or if another method is not present, an
error is reported.
To view the configuration, use the show config in LINE mode or the show running-config
command in EXEC Privilege mode.
Defining a AAA Method List to be Used for RADIUS
To configure RADIUS to authenticate or authorize users on the system, create a AAA method list.
Default method lists do not need to be explicitly applied to the line, so they are not mandatory.
To create a method list, use the following commands.
Security
793