Filter
Top Products
8 www.emersonct.com SM-EZMotion Module User Guide
• On the menu bar, click a menu name to display a list
of options. On the menu, either click an option or use
the DOWN ARROW to move down the list, and then
press ENTER.
• Press ALT and press the underlined letter in the
menu name. Then press the underlined letter in the
option name. For example, to open a new
configuration file, press ALT and press F to open the
File menu. Then press N for New, see Figure 8
3.3.1.1 File
The File menu on the Menu Bar contains many different
options for file handling (e.g., saving files, importing files,
etc.). Figure 8 below shows the File menu expanded.
Figure 8: File Menu
3.3.1.1.1 New
New will open a new PowerTools Pro file. The user will be
asked what type of configuration to create (FM-3, FM-4, or
SM-EZMotion). For modules to be used with the Unidrive
SP, the SM-EZMotion should be selected.
3.3.1.1.2 Open
Open allows the user to open an existing application
created with PowerTools Pro. Navigate to the directory that
the desired file is located in, and double-click on the
specific file. Doing so will open the file for editing.
3.3.1.1.3 Close
Close will close the active configuration. If multiple files are
open simultaneously, the active file is the one in which the
Title Bar is highlighted.
3.3.1.1.4 Save
Selecting Save will save the active file on the users PC.
The location to which the file is saved is based on where
the file was previously saved. If the file has not yet been
saved, the Save As control box will open instead.
3.3.1.1.5 Save As...
Save As allows the user to save the active file using a
different name or to save an existing file to a different
directory location. Navigate to the directory to which the file
is to be saved, and click on the Save button.
3.3.1.1.6 Import
Import allows the user to import an existing FM-3 file into
an FM-4 configuration, or an existing FM-3 or FM-4 file into
an SM-EZMotion configuration. To import the file, open a
new file and select the configuration type that you wish to
convert to. Once the new file (of the desired configuration
type) is open, select Import, and find the file that is to be
converted. Select the file to be converted, and then click
Open. The existing file will then be converted into the new
file type. The new file must then be saved with the new file
name and extension.
3.3.1.1.7 Print
Print will send the active file to the printer specified by the
user. A Print Options box will open allowing the user to
specify which sections of the configuration are to be
printed. By default, all sections will be printed. To remove
a given section from the printout, uncheck the specific box
by clicking on the check mark.
3.3.1.1.8 Print Preview
Print Preview will open a new window that displays what an
actual hardcopy printout would look like. This can be
helpful to determine if formatting is correct.
3.3.1.1.9 Print Setup
Selecting Print Setup allows the user to change the Target
Printer, Paper Type, Paper Source, Print Orientation, and
other printer related parameters.
3.3.1.1.10 Recently Used Files
Also displayed on the File Menu are the last four files that
were edited using PowerTools Pro. To quickly access one
of these last four files, simply click on the file name in the
File Menu. Clicking on one of these files will open the
configuration for editing.
3.3.1.2 Edit
Figure 9 below shows the Edit Menu as selected from the
PowerTools Pro Menu Bar.