Filter
Top Products
Network Analyzer Customizing the Network Analyzer log view
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908 149
3 Select which columns to hide or display.
• In the Available Fields area, select the names of individual columns you want
to display, then select the single right arrow to move them to the Display Fields
area.
Alternatively, to display all columns, select the double right arrow.
• In the Display Fields area, select the names of individual columns you want to
hide, then select the single left arrow to move them to the Available Fields
area.
Alternatively, to hide all columns, select the double left arrow.
• To return all columns to their default displayed/hidden status, select Default.
4 Select OK.
To change the order of the columns
1 Go to a page which displays log messages, such as Tools > Network Analyzer >
Real-time.
2 Select Column Settings.
Lists of available and displayed columns for the log type appear.
3 In the Display Fields area, select a column name whose order of appearance you
want to change.
4 Select the up or down arrow to move the column in the ordered list.
Placing a column name towards the top of the Display Fields list will move the
column to the left side of the Formatted log view.
5 Select OK.
Filtering logs
When viewing log messages in Formatted view, you can filter columns to display
only those log messages that do or do not contain your specified content in that
column. By default, most column headings contain a gray filter icon, which
becomes green when a filter is configured and enabled.
Figure 7: Filter icons in Network Analyzer
To filter log messages by column contents
1 In the heading of the column that you want to filter, select the filter icon.
2 Select Enable.
Note: Filters do not appear in Raw view, or for unindexed log fields in Formatted view.
When viewing real-time logs, you cannot filter on the time column: by definition of the real-
time aspect, only current logs are displayed.
Filter icon Filter active