Filter
Top Products
System Maintenance
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908 71
FortiGuard Center
You can update the engine and vulnerability scan modules in one of the following
ways:
• manually upload update packages to the FortiAnalyzer unit from your
management computer
• configure the FortiAnalyzer unit to periodically request updates from the
Fortinet Distribution Network (FDN)
You must first register the FortiAnalyzer unit with the Fortinet Technical Support
web site, https://support.fortinet.com/ to receive RVS updates from the FDN. The
FortiAnalyzer unit must also have a valid Fortinet Technical Support contract,
which includes RVS update subscriptions, and be able to connect to the FDN or
the IP address that you have configured to override the default FDN addresses.
For port numbers required for license validation and update connections, see the
Fortinet Knowledge Center article FDN Services and Ports.
For more information about configuring vulnerability scan jobs and viewing
vulnerability scan reports, see “Tools” on page 157.
To manually upload RVS updates or to configure scheduled RVS updates, go to
System > Maintenance > FortiGuard Center.
Encrypt configuration
file
Select to encrypt the backup file. Enter a password in the
Password field and enter it again in the Confirm field. You
will need this password to restore the file.
You must encrypt the backup file if you are using a
secure connection to a FortiGate or FortiManager device.
Backup Select to back up the configuration.
Restore Restore the configuration from a file.
Restore configuration
from:
Currently the only option is to restore from a PC.
Filename Enter the configuration file name or use the Browse
button if you are restoring the configuration from a file on
the management. computer.
Password Enter the password if the backup file is encrypted.
Restore Select to restore the configuration from the selected file.
Firmware
Partition A partition can contain one version of the firmware and
the system configuration.
Active A green check mark indicates which partition contains the
firmware and configuration currently in use.
Last Upgrade The date and time of the last update to this partition.
Firmware Version The version and build number of the FortiAnalyzer
firmware. On the backup partition, you can:
• Select Upload to replace with firmware from the
management computer.
• Select Upload and Reboot to replace the firmware.