Filter
Top Products
System Admin
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908 51
RADIUS Server
RADIUS servers authenticate administrators. The following procedure explains
how to add a RADIUS server for authenticating administrators.
To add a RADIUS server
1 Go to System > Admin > RADIUS Server.
2 Select Create New.
3 Configure the following and select OK:
Administrator Settings
Administrators Settings enables you to configure some common settings for all
administrator accounts, including the idle timeout (how much time must pass
without activity before the FortiAnalyzer unit logs out an administrator), the
language for the web-based manager, and the PIN for the LCD panel. You can
also enable or disable administrative domains (ADOMs).
To configure administrators, go to System > Admin.
Figure 25: Administrators Settings
Name Enter a name to identify the server.
Server IP/Name Enter the IP address for the server.
Shared Secret Enter the password for the server.
Authentication
Protocol
Select which protocol the FortiAnalyzer unit will use to
communicate with the RADIUS server.
Note: Only the admin administrator can add or change administrator account information.
Idle Timeout Set the idle timeout to control the amount of inactive time before
the administrator must log in again. To improve security keep the
idle timeout to a low value (for example, five minutes).
Note that sessions will not time out when viewing real-time logs.
Web Administration
Language
Set the language for the web-based manager.