Filter
Top Products
FortiAnalyzer Version 3.0 MR7 Administration Guide
56 05-30007-0082-20080908
Config System
5 Select OK.
6 In Remote Clients, enter the IP address or domain name of the remote system or
user ID.
7 Select the type of Permission required and select Add.
8 Select OK.
Default file permissions on NFS shares
By default, when a user adds a new file or folder, the permissions are:
• read, write, execute for the owner (user)
• read and execute for the Admin group and Others group.
You can set file permissions in the CLI. For more information, see the config
nas share command in the FortiAnalyzer CLI Reference.
Config
You can use System > Config to setup and maintain miscellaneous features,
such as local logging, log aggregation, log forwarding, IP aliases, and LDAP
connections.
Automatic file deletion and local log settings
The FortiAnalyzer unit creates its own system log messages to provide
information on system events occurring on the unit, such as system activity,
administration events and IPSec negotiations with configured devices.
To configure logging behavior for your FortiAnalyzer unit, go to System >
Config > Log Setting.
Note: The default permissions for files and folders is read and execute privileges. The
owner of the document also has write privileges. To enable write access for users and
groups, you must select the write permission for the folder and for the user and the group.
For more information, see “Default file permissions on NFS shares” on page 56.