Filter
Top Products
System Admin
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908 47
Adding a route
Static routes provide the FortiAnalyzer unit with the information it needs to forward
a packet to a particular destination other than the default gateway.
To add a static route
1 Go to System > Network > Routing.
2 Select Create New.
3 Configure the following options:
4 Select OK.
Admin
Use the Admin option to configure and maintain FortiAnalyzer administrators,
administrative domains (ADOMs), set a user’s administrative access and maintain
passwords.
When the FortiAnalyzer unit is initially installed, it is configured with a single
master administrator account with the user name of “admin”. From this account,
you can add and edit administrator accounts, control the access level of each
administrator account and control the IP address for connecting to the
FortiAnalyzer unit. This account is permanent, and cannot be deleted from the
FortiAnalyzer unit.
When configuring administrators, you can add ‘@’ symbol in the name. For
example, admin_1@headquarters, to identify an administrator that will access the
FortiAnalyzer unit from the headquarters office of their organization.
To view a list of administrators for the FortiAnalyzer unit, go to System > Admin >
Administrators.
Figure 23: Administrator account list
Destination IP Enter the destination IP address network mask of packets that the
FortiAnalyzer unit has to intercept.
Mask Enter a netmask to associate with the IP address.
Gateway Enter the IP address of the gateway where the FortiAnalyzer unit
will forward intercepted packets.
Interface Select a port from the list of available ports.
Delete
Edit
Change Password