Filter
Top Products
Device Configuring device groups
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908 87
To block a device
1 Go to Device > All > Device.
2 From Show, select Unregistered.
If the device is currently registered, you must first delete the device before you
can block it. For more information, see “Viewing the device list” on page 73.
3 In the row corresponding to the device that you want to block, in the Action
column, select Block.
The device appears in the list of blocked devices.
To unblock a device
1 Go to Device > All > Blocked Device.
2 In the row corresponding to the device that you want to remove from the list of
blocked devices, select Delete.
A confirmation dialog appears.
3 Select OK.
The device is removed from the list of blocked devices. If the device attempts to
connect to the FortiAnalyzer unit, it may appear in the device list as an
Unregistered device, according to your configuration of Unregistered Device
Options. For more information, see “Configuring unregistered device connection
attempt handling” on page 79.
To unblock and add a device to the device list
1 Go to Device > All > Blocked Device.
2 In the row corresponding to the device that you want to remove from the list of
blocked devices, select Unblock.
A dialog appears, allowing you to add the device to the device list. If the device is
a known type, this also registers the device. To add the device to the device list,
see “To manually add a device or HA cluster” on page 82.
Configuring device groups
When you have multiple devices belonging to a department or section of your
organization, you may want to create device groups to simplify log browsing or
report configuration.
A device can belong to multiple groups. However, the device cannot be deleted
from the device list until it is removed from all groups.
To view device groups, go to Device > Group > Device Group.