Filter
Top Products
System Dashboard
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908 29
Figure 4: RAID Monitor displaying a disk that is being rebuilt
System Information
The System Information area of the Dashboard displays basic information about
the FortiAnalyzer unit, such as up time and firmware version.
Array Status Displays the following icons and status text when the RAID disk is
okay, failed or being rebuilt:
• green checkmark (OK) – indicates that the RAID disk has no
problems
• warning symbol (Warning) – indicates that there is a problem
with the RAID disk, such as a failure, and needs replacing. The
RAID disk is also in reduced reliability mode when this status is
indicated in the widget.
• wrench symbol (Rebuilding) – indicates that a drive has been
replaced and the RAID array is being rebuilt; it is also in
reduced reliability mode
• exclamation point (Failure) – indicates that multiple drives
have failed and the RAID array is corrupted and that the drive
must be reinitialized
Disk space usage Displays the amount of disk used in both percentage and a fill line.
Used/Free/Total Displays the amount of used disk space, available or free disk
space, and the total available disk space. These numbers are
displayed in GB.
Rebuild Status
progress bar
A bar indicating the progress of the rebuilding of a RAID array.
This bar displays the progress in percent. This bar displays only
when a RAID array is being rebuilt.
Estimated rebuild
time
[start and end time]
(For software RAID
only)
The time period of when the rebuild will be complete. The time is
displayed by the number of hours, minutes and seconds. The time
period also indicates when the rebuilding process will end,
displaying the name of the day, and the time in 12-hour format, for
example, Friday at 3:14 pm.
This time period displays only when an array is being rebuilt.
This time period will not display in hardware RAID, such as
FortiAnalyzer-2000/2000A, and FortiAnalyzer-4000/4000A.
Rebuild Warning A bar and text reminding you the system has no redundancy
protection until the rebuilding process is complete. This text
displays only when an array is being rebuilt.
Rebuild
Status bar
Rebuilding
icon