Filter
Top Products
FortiAnalyzer Version 3.0 MR7 Administration Guide
30 05-30007-0082-20080908
Dashboard System
Figure 5: System Information
Setting the time
Set the system time to ensure correct report time ranges and scheduling and
accurate logging. You can either manually set the FortiAnalyzer system time or
you can configure the FortiAnalyzer unit to automatically keep its system time
correct by synchronizing with a Network Time Protocol (NTP) server.
To set the system time, go to System > Dashboard and select Change for the
System Time.
Figure 6: Time Settings
Serial Number The serial number of the FortiAnalyzer unit. The serial number is
unique to the FortiAnalyzer unit and does not change with
firmware updates. Use this number when registering your
FortiAnalyzer unit with Fortinet.
Uptime The time in days, hours and minutes since the FortiAnalyzer was
started or last rebooted.
System Time The current time according to the FortiAnalyzer internal clock.
Select Change to change the time or configure the FortiAnalyzer
unit to obtain the time from an NTP server. For more information,
see “Setting the time” on page 29.
Host Name The name of the FortiAnalyzer unit. For more information about
changing the name, see “Changing the host name” on page 30.
Firmware Version The version of the firmware installed on the FortiAnalyzer unit.
Select Update to upload a new version of the firmware. For more
information about updating the firmware, see “Changing the
firmware” on page 30.
System Time The current FortiAnalyzer system date and time.
Refresh Update the display of the current FortiAnalyzer system date and
time.
Time Zone Select the FortiAnalyzer unit’s time zone.
Set Time Select to set the FortiAnalyzer system date and time to the values
you set in the Year, Month, Day, Hour, Minute and Second fields.
Alternatively, select Synchronize with NTP Server.