Filter
Top Products
RPRINTER/NPRINTER Setup (Netware 3.x and Netware 4.x)
109
2. Load a Web browser on a network station that can communicate with
the print server over TCP/IP.
3. Direct your Web browser to URL:
“
http://
PrintNetIPaddress
/networkConf.html”
(e.g., “
http://192.75.11.9/networkConf.html”).
NOTE: If prompted for a “User ID” and password first, type in “
root
” for
the ID and press ENTER at the password prompt since there’s no
password by default.
4. Look under the “Novell” section and find a row in the RPRINTER
category.
5. Click on “Enabled” and enter the name used with the PSERVER.NLM
started in step 1 into the “Print Server Name” field.
NOTE: If it is an NDS pserver, only enter the PSERVER name and not
the context (e.g.,
sales_ps
).
6. Enter the printer number of the printer you would like serviced into the
“Printer Number” field, and then select the destination on the PrintNet
you would like to use for output.
7. Repeat steps 4 through 6 for each additional printer you would like to
have serviced.
8. Click on the SUBMIT button when done and physically re-power the
printer to make the new settings take effect.
Manual (Telnet) Method
1. Load a PSERVER on your Netware 3.x or Netware 4.x file server
(i.e., issue a
load pserver
pservername
command on the file
server).
NOTE: If it is an NDS PSERVER on a Netware 4.x file server, you must
specify the pserver name and context for
pservername
. For
example:
load pserver .sales_ps.sales.printronix
2. Telnet to the print server. This will bring up a login screen:
telnet
ipaddress