Filter
Top Products
Setting Password Security (NDS and Bindery setups)
95
Manual (Telnet) Method
1. Telnet to the print server. This will bring up a login screen:
telnet
ipaddress
NOTE: If prompted for a “User ID” and password first, type in “
root
” for
the ID and press ENTER at the password prompt since there’s no
password by default.
2. You should now see a prompt displayed that has the PrintNet’s IP
address followed by a colon then root.
ipaddress
:root>
3. At the prompt, enter:
store pserver novell fserver del
fservername
where
fservername
is the name of the Novell file server you want to
remove as a preferred file server.
4. Reset the unit to ensure the changes take effect.
reset
Setting Password Security
(NDS and Bindery setups)
Besides the general security measures, a Novell setup provides further
password security. A password can be set on the PrintNet and within your
PCONSOLE or Netware Administrator setup so that when the PrintNet
tries to login to the file server, the passwords are compared.
To set the password on the Novell host for use in a PSERVER setup, you
will need to:
Netware 4.x
1. Login to NetWare Administrator as a user with security equal to
“Admin” on your Novell host.
2. Double click on the print server object you are using for your setup.
This will bring up the print server objects details pages.
3. Select the “Change Password...” button on the “Identification” page.
4. At the prompts, type and re-type the new password. Press OK when
you are finished.