Filter
Top Products
Mandatory
59
Unix PrintNet Configuration
There are mandatory settings needed before the print server can be
detected on the network, as well as some additional optional settings.
This section offers alternative methods for configuring your PrintNet and
mentions some of the more common optional settings available.
Mandatory
Since TCP/IP is used, the PrintNet must be configured, at a minimum,
with an IP address and subnet mask before it can be seen on the
network. To configure these options, see “Configuration Tools” on
page 23.
Optional
Additional settings, like routing entries, can be configured allowing for
communication across subnets.
Configuration of the PrintNet can be done from the control panel or
through host commands. To configure these options, see “Configuration
Tools” on page 23.