Filter
Top Products
Miscellaneous Commands
145
start fox|tts|loopb prn
start fox prn
Begin a debugging test on one of the I/O ports on the PrintNet. The
tests available are:
fox A continuous stream of text sent to the attached
printer. This is a good test for troubleshooting
hardware as long as the attached printer supports
text output.
tts A continuous stream of Gandalf 400C TTS-
compatible text sent to the attached printer.
loopb Loopback test. Any input characters from the device
attached to the I/O port is echoed back.
stop prn
stop prn
Stop an output test on an I/O port.
disable
ioport
|
destination
disable prn
Disable an
I/O port
so that queued jobs are not printed, or disable a
destination
so jobs cannot be queued to it.
enable
ioport
|
destination
enable prn
Enable an
I/O port
so that queued jobs are printed, or enable a
destination
so jobs can be queued to it.
close tcp
TCPindexnumber
close tcp 3
Force a TCP/IP connection between a TCP/IP host and the PrintNet
to close. The
TCPindexnumber
can be retrieved from “debug tcp”
output.
ping [-s]
hostIPaddress
[
datasize
[
packetnumber
]]
ping 192.75.11.30
“ping” another TCP/IP host specified by
hostIPaddress
on the
PrintNet network.
datasize
is the datagram packet size which
defaults to 64 bytes if no size is included in the syntax and
packetnumber
is the number of requests to be sent.