Filter
Top Products
10Base2 and 10Base-T
15
10Base2 and 10Base-T
The PrintNet interface card at the rear of the printer for the 10Base2 and
10Base-T interfaces has three indicator lights, shown in Figure 1.
Figure 1. Status Indicator Lights (10Base2 and 10Base-T)
The LED patterns and the respective indications are given in Table 1.
Table 1. LED Pattern Indications
STAT ERR NET Mode
ON OFF ON RAM Test
ON OFF OFF ROM Test
ON ON OFF EEPROM Test
OFF ON ON Network Interface Test
OFF OFF ON PRN1 Test
FLASH OFF FLASH Run Mode
FLASH ON FLASH Auto Reset Mode
FLASH FLASH OFF Firmware Panic
ON FLASH ON Hardware Exception
STAT NETERR
Grn Red Grn
123
OFF
(Default is all
switches OFF,
as shown.)
Status
Indicators
DIP
Switches