Filter
Top Products
Set Commands
137
set snmp manager
index ipaddress trap-community
The PrintNet continuously generates traps but unless the trap table is
filled in, no SNMP manager will receive this information. To set the
PrintNet to send traps to a particular SNMP manager, use this
command to add a SNMP manager to the trap table.
index
is the idex number of the trap table.
ipaddress
is the IP
address of the SNMP manager receiving traps.
trap-community
is
the community string sent along with the trap information.
set sysinfo name
newname
set sysinfo name salesprinter
Set a descriptive name defined by
newname
for PrintNet
identification purposes. This is not used in the operation of the print
server in any way.
set sysinfo location
description
set sysinfo location salesdept
Set the physical location of the PrintNet. This is for identification
purposes and is not used in the operation of the print server in any
way.
set sysinfo contact
contactname
set sysinfo contact Paul_Harris
Set a person or department to contact in case of print server trouble.
set sysinfo loginfo [-]sys | [-]tcp | [-]ipx | [-]spx
set sysinfo loginfo -sys ipx
Set the PrintNet debugging information type. Usually this information
includes unexpected errors or exceptions from the print server
divided into these groups:
sys General system messages.
tcp TCP stack messages.
ipx IPX stack messages.
spx SPX stack messages.
NOTE: This is not printer or job logging information.