Filter
Top Products
Chapter 8 Complete Command List
132
set dest
destination
name
newname
set dest d1prn name laser
Change the current name of the
destination
to a new name as
indicated by
newname
. This
newname
must be nine characters or
less or it will be truncated. These names are case sensitive.
set dest
destination
backchannel prn [prn]
set dest d1prn backchannel prn
Establish a return path for printer feedback for a given
destination
.
Since the PrintNet I/O port is bi-directional, however, you will most
likely use the same I/O port that the
destination
is currently sending
jobs to.
set dest
destination
model
modelname
set dest d1prn model m4
Associate a model with a destination. Jobs sent to the named
destination
are processed according to the options defined in the
named model.
set dest
destination
logpath
logpathname
set dest d1prn logpath l4
Associate a logpath with a destination. Jobs sent to the named
destination
are logged according to the settings defined in the
named logpath.
set dest
destination
service [[-]socket][[-]lpd]
[[-]lpsched] [[-]rprinter] [[-]pserver] [[-]netbios]
[[-]ftpd]
set dest d1prn service -netbios
Set the
destination
to handle only certain print services. To add a
service, specify the service name. To disable a service, use “
-
”
before the name. The available services are:
socket Direct socket printing via TCP/IP.
lpd LPR printing with TCP/IP including LPR clients on
any platform.
lpsched LP or System V printing with TCP/IP.
rprinter Novell RPRINTER support.
pserver Novell PSERVER support.