Fujitsu 9045 Printer User Manual


 
Set Commands
135
descramble Automatic descrambling of print jobs passing
through which have been scrambled using
Printronix proprietary scramble Unix utility,
npscramble.
xtab Tab expansion from 1 to 16 spaces.
set model
model
trailer
trailerstring
set model m7 trailer $FF
Set a trailer string to be sent to the printer at the end of any print jobs
passing through this
model. trailerstring
can consist of up to nine
elements. An example element is a hexadecimal code (e.g., 0x04) or
a pre-defined variable on the print server (e.g., $FF for a formfeed).
Use “
list var
” to see all available variables.
set model from default
Set all model settings back to factory defaults.
set model from stored
Set all current model settings to the values stored in flash memory.
set prn [-]autofd
set prn -autofd
Assert or do not assert the AUTOFD line for carriage return insertion.
This only affects printers that support this function such as impact
printers.
set prn flush
set prn flush
Flush the data in the parallel port input and output buffers.
set prn unlock
set prn unlock
Release the access lock on the parallel port.
set prn timeout
minutes
|none
set prn timeout none
Terminate the print job sent to the parallel port if it is not printed after
the timeout period in
minutes
expires. The
minutes
value ranges
from 0 though 255 with 0 indicating no timing out to take place. This is
the default setting and should be fine for most print setups.