Filter
Top Products
Chapter 8 Complete Command List
146
NOTE: To use a host or IP name instead of the address, you must have
set the DNS server on the PrintNet. Use the command
“
set
sysinfo dns...
” to do this.
telnet
hostIPaddress
[
escapecharacter
]
telnet 192.75.11.35
Start a Telnet session with another TCP/IP host specified by
hostIPaddress
on the PrintNet network. If
escapecharacter
is used,
it resets the key sequence used to exit the Telnet session. It will
return you to the telnet> prompt where you can execute “
quit
.” Use
the “
keycode
” command to find out exact escape characters if
needed. The default character is CTRL-].
NOTE: To use a host or IP name instead of the address, you must have
set the DNS server on the PrintNet. Use the command “
set
sysinfo dns...
” to do this.
chr
string
Echo
string
or redirect
string
to an I/O port using “chr
string
>
ioport
.”
keycode
Determine the hexadecimal value for a key to be used as the escape
character with the PrintNet built-in “
telnet” command.