HP (Hewlett-Packard) 2570 Printer User Manual


 
13
Troubleshooting information
This chapter contains troubleshooting information for the HP All-in-One. Specific
information is provided for installation and configuration issues, and some operational
topics. For more troubleshooting information, see the onscreen HP Image Zone Help
that came with your software. For more information, see Use the onscreen Help.
Many issues are caused when the HP All-in-One is connected to the computer using a
USB cable before the HP All-in-One software is installed on the computer. If you
connected the HP All-in-One to your computer before the software installation screen
prompts you to do so, you must follow the steps below.
Troubleshooting common setup issues
1. Disconnect the USB cable from the computer.
2. Uninstall the software (if you have already installed it).
3. Restart your computer.
4. Turn off the HP All-in-One, wait one minute, then restart it.
5. Reinstall the HP All-in-One software.
Caution Do not connect the USB cable to the computer until prompted by the
software installation screen.
For information about uninstalling and reinstalling the software, see Uninstall and
reinstall the software.
See the list below for information on topics covered in this chapter.
Additional troubleshooting topics in this User Guide
Setup troubleshooting: Contains information on hardware setup and software
installation troubleshooting.
Operational troubleshooting: Contains information on issues that might occur
during normal tasks when using the HP All-in-One features.
Device update: Based on advice from HP customer support or a message on the
color graphics display, you might access the HP support website to retrieve an
upgrade for your device. This section contains information about updating your
device.
Network Troubleshooting: See Network troubleshooting. This section contains
information on software installation troubleshooting for a wired network.
Other sources of information
Setup Guide: The Setup Guide explains how to set up the HP All-in-One.
User Guide: The User Guide is the book you are reading. This book describes
the basic features of the HP All-in-One, explains how to use the HP All-in-One,
and contains setup and operational troubleshooting information.
HP Image Zone Help: The onscreen HP Image Zone Help describes how to use
the HP All-in-One with a computer and contains additional troubleshooting
User Guide 101
Troubleshooting