HP (Hewlett-Packard) 2570 Printer User Manual


 
3.
If you are using an external Bluetooth
®
adapter for your computer, make sure
your computer is started and then attach the Bluetooth
®
adapter to a USB port on
the computer. If you have Windows XP with Service Pack 2 installed, the
Bluetooth
®
drivers are installed automatically. If you are prompted to select a
Bluetooth
®
profile, select HCRP.
If your computer has Bluetooth
®
built in, just make sure the computer is started.
4. On the Windows taskbar, click Start, and then click Printers and Faxes.
5. Double-click the Add Printer icon.
6. Click Next, and then select A Bluetooth Printer.
7. Follow the onscreen instructions to finish the installation.
8. Print as you would to any printer.
To install and print using the Widcomm stack (Windows)
1. Make sure that you have installed the HP All-in-One software on the computer.
Note The purpose of installing the software is to make sure the print
driver is available for the Bluetooth
®
connection. Therefore, if you have
already installed the software, you do not need to reinstall it. If you want
both a USB and a Bluetooth
®
connection to your HP All-in-One, install the
USB connection first. For more information, see the printed Setup Guide.
However, if you do not want a USB connection, select Directly to the
computer on the Connection Type screen. Also, on the Connect Your
Device Now screen, select the check box next to If you are unable to
connect your device now... at the bottom of the screen.
2.
Attach an HP Bluetooth
®
adapter to the front USB port of the HP All-in-One.
3. Click the My Bluetooth Places icon on the desktop or in the taskbar.
4. Click View devices in range.
5. Once the available printers are discovered, double-click the name of HP All-in-
One to finish the installation.
6. Print as you would to any printer.
Mac users
You can connect your HP All-in-One to a Mac that has Bluetooth
®
built in, or you can
install an external Bluetooth
®
adapter, such as an HP Bluetooth
®
adapter.
To install and print using Bluetooth
®
(Mac)
1. Make sure that you have installed the HP All-in-One software on the computer.
2.
Attach an HP Bluetooth
®
adapter to the front USB port of the HP All-in-One.
3. Press the On button on the control panel to turn the HP All-in-One off, and press
it again to turn the device on.
4.
Attach a Bluetooth
®
adapter to the computer and turn it on. Or, if your computer
has Bluetooth
®
built in, just turn on your computer.
5. Open the Printer Setup Utility from the Applications:Utilities folder.
Note This utility is called the Printer Setup Utility on 10.3 and later. It is
called Print Center on 10.2.x.
6. From the pop-up menu, choose Bluetooth, then click Add
Chapter 3
26 HP Photosmart 2570 All-in-One series
Finish setup