To load postcards, Hagaki, or panorama photo paper
1. Remove all paper from the paper tray.
2. Insert the stack of cards into the far right side of the paper tray with the short
edge forward and the print side down. Slide the stack of cards forward until it
stops.
3. Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward against the stack of cards until it stops.
Do not overload the paper tray; make sure the stack of cards fits within the paper
tray and is no higher than the top of the paper-width guide.
Load envelopes
You can load one or more envelopes into the paper tray of your HP All-in-One. Do not
use shiny or embossed envelopes or envelopes that have clasps or windows.
Note For specific details on how to format text for printing on envelopes,
consult the help files in your word processing software. For best results,
consider using a label for the return address on envelopes.
To load envelopes
1. Remove all paper from the paper tray.
2. Insert one or more envelopes into the far right side of the paper tray with the
envelope flaps up and to the left. Slide the stack of envelopes forward until it stops.
Tip For more help on loading envelopes, refer to the diagram engraved
in the base of the paper tray.
3. Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward against the stack of envelopes until it stops.
Do not overload the paper tray; make sure the stack of envelopes fits within the
paper tray and is no higher than the top of the paper-width guide.
Chapter 5
48 HP Photosmart 2570 All-in-One series
Load originals and paper