HP (Hewlett-Packard) 2570 Printer User Manual


 
View and print network settings
You can display a summary of the network settings on the HP All-in-One control
panel, or you can print a more detailed configuration page. The network configuration
page lists all of the important network settings such as the IP address, link speed,
DNS, and mDNS. For information on the network settings, see Network configuration
page definitions.
1. Press Setup.
2. Press
until Network is highlighted, then press OK.
The Network Menu appears.
3. Do one of the following:
To display wired network settings, press OK. Then press
until Display
Wired Summary is highlighted, then press OK.
This selects View Network Settings and then displays a summary of the
wired (Ethernet) network settings.
To print the network configuration page, press OK, then press OK again.
This selects View Network Settings and then prints the network
configuration page.
Restore network defaults
You can reset the network settings to what they were when you purchased your
HP All-in-One.
1. Press Setup.
2. Press
until Network is highlighted, then press OK.
The Network Menu appears.
3. Press
until Restore Network Defaults is highlighted, and then press OK to
confirm.
Change advanced network settings from the control panel settings
The advanced network settings are provided for your convenience. However, unless
you are an advanced user, you should not change any of these settings. The
advanced settings include Link Speed, IP Settings, and Memory Card Security.
Set link speed
You can change the speed at which data is transmitted over the network. The default
is Automatic.
1. Press Setup.
2. Press
until Network is highlighted, then press OK.
The Network Menu appears.
3. Press
until Advanced Setup is highlighted, then press OK and press OK again.
This selects Advanced Setup and then displays the Link Speed screen.
4. Press
to highlight the link speed that matches your network hardware, then
press OK.
1. Automatic
2. 10-Full
3. 10-Half
Chapter 4
34 HP Photosmart 2570 All-in-One series
Network setup