Filter
Top Products
I received a message on the color graphics display to attach the control panel
faceplate
Solution This might mean the control panel faceplate is not attached, or it is
attached incorrectly. Make sure to align the faceplate over the buttons on the top
of the HP All-in-One and snap it firmly into place.
The color graphics display shows the wrong language
Solution You can change the language settings at any time from the Setup
Menu. For more information, see Setup Menu
The wrong measurements are showing in menus on the color graphics display
Solution You might have selected the incorrect country/region on your HP All-
in-One. The country/region you select determines the paper sizes shown on the
color graphics display.
To change the country/region, you must reset the language settings. You can
change the language settings at any time from the Setup Menu. For more
information, see Setup Menu.
I received a message on the control panel display to align the print cartridges
Solution Printer maintenance is required to ensure excellent print quality. For
more information, see Align the print cartridges.
I received a message on the color graphics display that the print cartridge
alignment failed
Cause The incorrect type of paper is loaded in the paper tray, for example,
colored paper, paper with text on it or certain recycled paper.
Chapter 13
104 HP Photosmart 2570 All-in-One series
Troubleshooting