Filter
Top Products
Operation and Usage 3Ć41
Note It is recommended that you set the time in fax parameter 19 to match the same length of time as
the outgoing message recorded on your answering machine. Factory set time is 20 seconds. To
change the time in fax parameter 19, refer to the information on fax parameters in chapter 4.
Reception Print Quality on the HP FAX-700 and FAX-750
The HP FAX-700 or FAX-750 is factory set to print at standard resolution and with Photo Quality set to Quality. If you
want better resolution, set the resolution to Fine. If want to print faster and use less ink, leave the resolution at Standard
and set Photo Quality to Economy.
To set the resolution to Fine, press the buttons in the sequence shown.
Menu
→ 6
→
Stop
Enter
→ 3
→
Enter
→
→
→
Enter
→
To set Photo Quality to Economy, press the buttons in the sequence shown.
Menu
→ 6
→
Stop
Enter
→ 5
→
Enter
→
→
→
Enter
→
Note When transmitting documents, you can temporarily alter the basic resolution that you have set by
pressing front panel buttons as described earlier in this chapter. However, those buttons do not
affect reception.
Reception Print Quality on the HP FAX-900 and FAX-950
Your fax machine is factory set to print in Quality mode. If you want to print fast using less ink, you will need to
configure the fax machine for fast resolution.
To configure for fast resolution, press the buttons in the sequence shown.
Menu
→ 7
→
Set
→
→
Stop
Set
→
4
→
Set
→ 1 →
0
→
3
→