Filter
Top Products
Problem Resolution 5Ć23
Table 5-2. HP FAX-700 and FAX-750 Service Parameters (Continued)
Service
Parameter
Number
Display
Indication
Parameter
Description
Settings Current
Setting
Standard
Setting
29 SILENT
DETECT IT
Time interval of silence
needed for the 700/750
to detect silence. The de-
fault is 5 seconds, so
there must be a continu-
ous 5 seconds of silence
to the machine to detect
silence
0...99 X 100 ms 50 50
30 MAX RING Selects the maximum
number of rings before a
communication failure is
recognized
1...20 TIMES 20 20
31 RTC EOL Selects the end-of-line
indicator to be received
before return to control
01: EOL *6*
02: EOL *12
11
32 NOT USED
33 MAX XMT
SPEED
Selects the highest trans-
mission speed for the
modem
01: 2400 BPS
02: 4800 BPS
03: 7200 BPS
04: 9600 BPS*
44
34 MAX RCV
SPEED
Selects the highest re-
ception speed for the
modem
01: 2400 BPS
02: 4800 BPS
03: 7200 BPS
04: 9600 BPS*
44
35 XMT LEVEL Sets the amplitude of the
output signals trans-
mitted
01: 0 DBM...
16: –15 DBM
99
36 RCV LEVEL Sets the sensitivity of the
fax machine to received
signals
01: –33 DBM...
16: –48 DBM
11 11
37 CABLE
EQUALIZE
Selects whether or not to
Equalize loss (amplitude
distortion) Between Ma-
chine and the phone
company exchange
0:off* / 1:on 0 0
38 ECHO
PROTECT
Selects whether or not to
activate echo protection
0:off / 1:on* 1 1
39 XMT TO RCV
INTRVL
Selects the time interval
between when the fax
machine ceases trans-
mission and is ready to
receive a call
01: 100 ms
02: 200 ms
03: 500 ms*
33
40 NSF Disable/enable non-stan-
dard facility (only
700/750 to 700/750)
0:off / 1:on* 1 1