Filter
Top Products
Operation and Usage3Ć42
To reconfigure for quality resolution, press the buttons in the sequence shown.
Menu
→ 7
→
Set
→
→
Stop
Set
→
4
→
Set
→ 2 →
0
→
3
→
Substitute Memory Reception on the HP FAX-700 and FAX-750
The HP FAX-700 and FAX-750 have the ability to store an incoming document if a paper jam or an out of paper or ink
condition occurs during the reception. An information code will appear in the fax machine display indicating the
condition requiring correction. Stored documents are automatically printed when the condition is corrected. If a docu-
ment is partially printed when the condition occurs, the remainder of the document will be stored and printed.
If a power failure condition occurs, the fax machine will not be able to store the incoming document information.
When power is restored, a power failure report will automatically be printed. Notify the sending station that the docu-
ment must be resent to you.
Setting number 10, Receive to Memory, is normally set to option 2 at the factory, and substitute memory reception
will automatically take place. However, if setting 10 has been set to option 1, Never, then it must be set to option 2,
Print on Error, for substitue memory reception to take place.
To use substitute memory reception mode if setting 10 has been set to option 1, press the buttons in the sequence
shown.
Menu
→ 6
→
Enter
→
→
Stop
1 → 0 →
→
Enter
→
Enter
→
Substitute Memory Reception on the HP FAX-900 and FAX-950
The HP FAX-900 and FAX-950 have the ability to store an incoming document if a paper jam or an out of paper or ink
condition occurs during the reception. An information code will appear in the fax machine display indicating the
condition requiring correction. Stored documents are automatically printed when the condition is corrected. If a docu-
ment is partially printed when the condition occurs, the remainder of the document will be stored and printed.
If a power failure condition occurs, the fax machine will not be able to store the incoming document information.
When power is restored, a power failure report will automatically be printed. Notify the sending station that the docu-
ment must be resent to you.
When fax parameter 22 is set to option 2 (valid), the substitute memory reception mode is enabled. If set to option 1
(invalid), the mode is disabled.
To use substitute memory reception mode, press the buttons in the sequence shown.
Menu
→ 7
→
Set
→
→
Stop
Set
→
4
→
Set
→
→
2 →
2
→
2
→