Filter
Top Products
Menu item Sub-menu item Sub-menu item Values Description
PCL Form Length Type a value
between 5 and 128
lines. The factory
default is 60 lines.
PCL is a set of printer commands that
Hewlett-Packard developed to provide
access to printer features.
Orientation Portrait (default)
Landscape
Select the orientation that is most often
used print jobs. Select Portrait if the short
edge is at the top or select Landscape if the
long edge is at the top.
Font Source Select the source
from the list.
Use this feature to select the font source for
the user-soft default font.
Font Number Type the font
number. The range
is between 0 and
999. The factory
default is 0.
Use this feature to specify the font number
for the user-soft default font using the
source that is specified in the Font Source
menu item. The device assigns a number to
each font and lists it on the PCL font list
(available from the Administration menu).
Font Pitch Type a value
between 0.44 and
99.99. The factory
default is 10.00.
If Font Source and Font Number indicate a
contour font, then use this feature to select
a default pitch (for a fixed-spaced font).
PCL Font Point Size Type a value
between 4.00 and
999.75. The factory
default is 12.00.
If Font Source and Font Number indicate a
contour font, then use this feature to select
a default point size (for a proportional-
spaced font).
Symbol Set PC-8 (default)
(50 additional
symbol sets from
which to choose)
Use this feature to select any one of
several available symbol sets from the
control panel. A symbol set is a unique
grouping of all the characters in a font.
Append CR to LF No (default)
Yes
Use this feature to configure whether a
carriage return (CR) is appended to each
line feed (LF) encountered in backwards-
compatible PCL jobs (pure text, no job
control).
Suppress Blank
Pages
No (default)
Yes
This option is for users who are generating
their own PCL, which could include extra
form feeds that would cause blank pages to
be printed. When Yes is selected, form
feeds are ignored if the page is blank.
Media Source
Mapping
Standard (default)
Classic
Use this feature to select and maintain
input trays by number when you are not
using the device driver, or when the
software program has no option for tray
selection.
Table 2-14 Device Behavior menu (continued)
48 Chapter 2 Control Panel ENWW