Filter
Top Products
Load media
This section contains information about loading standard- and custom-size media into the input trays.
CAUTION To avoid a jam, never add or remove paper from a tray while printing or copying
from that tray. To avoid damaging the MFP, print labels and envelopes from tray1 only. Print
on only one side of labels, envelopes, and transparencies.
Load the flatbed scanner
Place the document face-down on the scanner glass.
Load the ADF
Load the document face-up in the ADF.
Load tray1
Tray1 holds up to 100 sheets of paper or 10 envelopes. For more information about supported
media, see
Select print media.
Use the following procedure if tray1 is loaded continually with the same type of media, and the media
is not usually removed from tray1 between print jobs. The following procedure can also increase the
MFP performance when printing from tray1.
CAUTION To avoid a jam, never add or remove media from a tray while printing from that
tray.
1. Touch Copy.
2. Touch Paper Selection.
3. Touch Tray 1 Any Size.
4. Touch the correct media size.
NOTE If you select Custom as the media size, also select the unit of measure and the
X and Y dimensions.
5. Touch OK.
6. Touch OK again.
7. Open tray1.
78 Chapter 4 Media and trays ENWW