Filter
Top Products
Parameter Settings for Keypad Entry
Appendix C
C–8
B023 Deceleration rate at overload restric-
tion
1.0 1.0 1.0
B024 Overload restriction operation mode
(2)
01 01 01
B025 Overload restriction setting (2)
Rated current x
1.50
Rated current x
1.50
Rated current x
1.50
B026 Deceleration rate at overload
restriction (2)
1.00 1.00 1.00
B031 Software lock mode selection 01 01 01
B034 Run/power-on warning time 0. 0. 0.
B035 Rotational direction restriction 00 00 00
B036 Reduced voltage start selection 06 06 06
B037 Function code display restriction 00 00 00
B040 Torque limit selection 00 00 00
B041 Torque limit (1) (forward-driving in
4-quadrant mode)
150. 150. 150.
B042 Torque limit (2) (reverse-regenerat-
ing in 4-quadrant mode)
150. 150. 150.
B043 Torque limit (3) (reverse-driving in
4-quadrant mode)
150. 150. 150.
B044 Torque limit (4) (forward-regenerat-
ing in 4-quadrant mode)
150. 150. 150.
B045 Torque limit LADSTOP enable 00 00 00
B046 Reverse Run protection enable 00 00 00
B050 Controller deceleration and stop on
power loss
00 00 00
B051 DC bus voltage trigger level during
power loss
0.0 0.0 0.0
B052 Over-voltage threshold during power
loss
0.0 0.0 0.0
B053 Deceleration time setting during
power loss
1.00 1.00 1.00
B054 Initial output frequency decrease
during power loss
0.00 0.00 0.00
B080 [AM] terminal analog meter adjust-
ment
180 180 180
B081 [FM] terminal analog meter adjust-
ment
60 60 60
B082 Start frequency adjustment 0.50 0.50 0.50
B083 Carrier frequency setting 5.0 5.0 5.0
“B” Group Parameters Default Setting
User
Setting
Func.
Code
Name
-FE (Europe) -FU (U.S.) -FR (Japan)