Filter
Top Products
CEMT INQUIRE GTFTRACE
| Updatemodel (CFDT only)
| displays the update model specified for the coupling
| facility data table in the installed file definition. The
| values are:
| CONTENTION
| The coupling facility data table is updated using
| the contention model.
| LOCKING
| The coupling facility data table is updated using
| the locking model.
Updatestatus
displays whether the file is updatable. The values are:
UPdate
You can update records in the file.
NOUpdate
You cannot update records in the file.
Note: You can reset this value by overtyping it with a
different value.
CEMT INQUIRE GTFTRACE
Function: Show the GTF status.
Description: CEMT INQUIRE GTFTRACE tells you
whether CICS tracing to the MVS Generalized Tracing
Facility (GTF) is started or stopped.
This command is intended for use at terminals that do not
support the CETR full-screen tracing transaction.
For background information about GTF tracing, see the
CICS
Problem Determination Guide
.
Input: Press the Clear key and type CEMT INQUIRE
GTFTRACE (the minimum abbreviation is CEMT I G).
You will get a display screen, a sample of which is shown
below. If you want to change the displayed value, you can
then tab to the highlighted field and overtype it as required.
Sample screen
IN GTFTRA
STATUS: RESULTS - OVERTYPE TO MODIFY
Gtf Sto
Figure 76. CEMT INQUIRE GTFTRACE screen
If you place the cursor against the result and press ENTER,
CICS displays an expanded format as shown in Figure 77.
IN GTFT
RESULT - OVERTYPE TO MODIFY
Gtftrace
Status( Stop )
Figure 77. The expanded display
─ ──CEMT Inquire Gtftrace ─
Displayed fields
Gtftrace
indicates that this panel relates to a GTFTRACE inquiry.
STArt
CICS tracing to the MVS Generalized Tracing Facility
(GTF) is in progress.
STOpped
CICS tracing to the MVS Generalized Tracing Facility
(GTF) is not in progress.
Note: You can reset this value by overtyping it with a
different value.
Chapter 11. Master terminal CEMT 89