Filter
Top Products
CEMT INQUIRE DSAS
SOSABOVE
CICS is short on storage in at least one of the
dynamic storage areas above 16MB.
SOSBELOW
CICS is short on storage in at least one of the
dynamic storage areas below 16MB.
CDsasize(
value
)
displays the size, in bytes, of the CICS dynamic storage
area (CDSA). The size of this storage area is calculated
and managed by CICS automatically, within the overall
limits specified for all the DSAs that reside below the
16MB boundary.
RDsasize(
value
)
displays the current size of the read-only dynamic
storage area (RDSA). The size of this storage area is
calculated and managed by CICS automatically, within
the overall limits specified for all the DSAs that reside
below the 16MB boundary.
SDsasize(
value
)
displays the current size of the shared dynamic storage
area (SDSA). The size of this storage area is calculated
and managed by CICS automatically, within the overall
limits specified for all the DSAs that reside below the
16MB boundary.
Udsasize(
value
)
displays the size, in bytes, of the user dynamic storage
area (UDSA) below the 16MB boundary.
EDsalimit(
value
)
displays the maximum amount of storage, as a total
number of bytes, within which CICS can dynamically
allocate storage for the four individual DSAs that reside
above the 16MB boundary. (See the
CICS System
Definition Guide
for a description of the EDSALIM
system initialization parameter.)
Note: You can reset this value by overtyping it with a
different value.
If EDSALIMIT specifies a value lower than the current
limit, CICS may not be able to implement the new limit
immediately, but will attempt to do so over time as
dynamic storage is freed in the individual DSAs.
SOSAbove
displays whether CICS is short on storage in any of the
dynamic storage areas above 16MB. The values are:
NOTSOS
CICS is not short on storage in any of the dynamic
storage areas above 16MB.
SOS CICS is short on storage in at least one of the
dynamic storage areas above 16MB.
ECdsasize(
value
)
displays the size, in bytes, of the extended CICS
dynamic storage area (ECDSA) above the 16MB
boundary. The size of this storage area is calculated and
managed by CICS automatically, within the overall limits
specified for all the DSAs that reside above the 16MB
boundary.
ERdsasize(
value
)
displays the size, in bytes, of the extended read-only
dynamic storage area (ERDSA) above the 16MB
boundary. The size of this storage area is calculated and
managed by CICS automatically, within the overall limits
specified for all the DSAs that reside above the 16MB
boundary.
ESdsasize(
value
)
displays the current size of the extended shared
dynamic storage area (ESDSA). The size of this storage
area is calculated and managed by CICS automatically,
within the overall limits specified for all the DSAs that
reside above the 16MB boundary.
EUdsasize(
value
)
displays the size, in bytes, of the extended user dynamic
storage area (EUDSA) above the 16MB boundary. The
size of this storage area is calculated and managed by
CICS automatically, within the overall limits specified for
all the DSAs that reside above the 16MB boundary.
Chapter 11. Master terminal CEMT 73