Filter
Top Products
CEMT INQUIRE NETNAME
CId(
value
)
displays an 8-character correlation-identifier that is set
only for sessions, and only after a session has been
acquired. (The value relates to the previously acquired
session if there was one, if the session is not acquired).
CID is set as follows:
For LU6.2 sessions, it is an 8-character
hexadecimal token which is common to the two end
sessions that are connected together.
For MRO sessions, it is set to the termid of the
session on the system to which this session is
connected.
For LU6.1 sessions to IMS, it is set to the value of
NETNAMEQ as defined or negotiated.
For other LU6.1 sessions, it is set to the value
supplied by the other end of the 6.1 session.
Using CID, you can relate the two parts of an LU6.2,
MRO, or LU61 conversation together:
For LU6.2, you can inquire on the same CID.
For MRO, you can locate the session with the
terminal name.
For LU6.1 to IMS, you can inquire on the netname.
For other LU6.1, you can use the name to inquire
on the connected system.
Createsess (
vtam only
)
displays whether the terminal can be acquired
automatically by ATI transactions. This cannot be
specified for IRC sessions. The values are:
CReate
If the terminal is not in session, CICS acquires it if
it is needed to satisfy an ATI request.
NOCreate
If the terminal is not in session, CICS does not
acquire it to satisfy an ATI request. A session
must be started by, for example, a logon request
or a CEMT SET TERMINAL ACQUIRED
command before the ATI request can be satisfied.
If NOCREATE is set for an LU6.1 ISC session and
there are no allocatable sessions left, the
connection is placed OUTSERVICE.
Note: You can reset this value by overtyping it with a
different value.
Nature
displays the nature of the terminal—that is, whether it is
a physical device or a session, and whether it is local or
remote. The values are:
RTerminal
The terminal is owned by another CICS region.
RSession
The terminal is a session of a connection that is
owned by another CICS region.
Session
The terminal is an ISC or IRC session.
Local
The terminal is directly attached to this system
and is a physical device or a function of a cluster
controller.
Netname(
value
)
indicates that this panel relates to a NETNAME inquiry
and displays an 8-character network name.
For a physical terminal, the Netname is the name by
which this terminal is known to VTAM.
For ISC sessions, the Netname is the name by
which the session (or group of sessions) is known to
VTAM.
For IRC sessions, the Netname is the name used
by the connected region to logon to the interregion
communication program (DFHIRP).
For EXCI sessions, the Netname is DFHGEN for
generic sessions and, for specific sessions, it is the
value of the user_name parameter used in the EXCI
INITIALISE_USER call.
When an inquiry is made on DFHGEN, the name is
an 8-character field with a leading and trailing blank
(' DFHGEN '). The name must be enclosed in
quotes and include the blanks, so you enter the
command on the screen as follows:
CEMT INQ NETNAME(' DFHGEN ')
For remote devices, the Netname is the name by
which the device is known to the VTAM in the
owning region.
Pagestatus
displays whether pages after the first in a series are
written to the terminal on request from the operator or
automatically. The values are:
PAgeable
Pages are written on request.
AUtopageable
Pages are written automatically.
Note: You can reset this value by overtyping it with a
different value.
PRiority(
value
)
displays a 3-character string indicating the priority of this
terminal relative to other terminals. The priority of a task
is the sum of the transaction priority, the terminal priority,
and the operator priority. Priority has no meaning for
terminals that are ISC sessions being used as
alternative facilities. The value is in the range 0–255,
where 255 is the highest priority.
Note: You can reset this value by overtyping it with a
different value.
100 CICS Supplied Transactions