Filter
Top Products
This soft copy for use by IBM employees only.
Disk/Conference ==> ATMPE (ATMBIN disk managed by ATMPE at LGEVMA)
Request ==> GET Details:
Filename/Type ==> 8285P120 PACKAGE *
Description ==>
Requesting a copy of ″8285P120 PACKAGE″
GET request for disk ATMBIN sent to ATMPE at LGEVMA (2314)
Any CMS command ==>
Each package contains a self-extracting .EXE file for:
− The microcode (both BOOT and OPERATIONAL)
− The FPGA picocode
− Installation instructions
− The release note
− The new 8285 Installation and User′s Guide
If you replace GET with LIST and package_name with
*, you will get a list of
available packages sent to your reader.
•
Entering the TOOLS fast path command at the PROFS command line:
TOOLS SENDTO LGEVMA ATMPE ATMBIN GET package_name PACKAGE
where package_name is set to one of the following:
− 8285P100 for operational code level 1.0.0
− 8285P101 for operational code level 1.0.1
− 8285P120 for operational code level 1.2.0
− F85HV130 for operational code level 1.3.0
− F85HV140 for operational code level 1.4.0
Each package contains a self-extracting .EXE file for:
− The microcode (both BOOT and OPERATIONAL)
− The FPGA picocode
− Installation instructions
− The release note
− The new 8285 Installation and User′s Guide
If you replace GET with LIST and package_name with
*, you will get a list of
available packages sent to your reader.
The following tables summarize the various code packages available and the
names of their component files.
Chapter 6. IBM 8285 Planning and Installing 113