Filter
Top Products
This soft copy for use by IBM employees only.
8.4.2 Prerequisites
This section lists the recommended hardware and software requirements for the
installation and operation of Nways Manager for Windows.
Hardware Requirements:
•
Minimum 80486 DX processor at a minimum 33 MHz
•
SVGA high-resolution workstation monitor support
An SVGA adapter is required only if SVGA support is not built into the
motherboard.
•
16 MB RAM (24 MB for large networks)
•
156 MB free hard disk (240 MB recommended) which includes:
− 8 MB free hard disk for NETMANAGE NEWT V4.6
− 125 MB free hard disk for NetView for Windows V2.1
− 25 MB free hard disk for Nways Manager for Windows V2 and 14 MB
for V1
•
Network interface card with NDIS or ODI support
•
CD-ROM drive
•
3.5-inch diskette drive
•
Mouse supported by Microsoft Windows
Software Requirements:
•
DOS 5.0 or later
•
MIcrosoft Windows 3.1 or later
•
NDIS or ODI device driver for the Network interface card
8.4.3 Using Nways Manager for Windows with IBM 8285
Please refer to
Campus ATM Network Management Guidelines
, SG24-5006 for
network management using the latest software.
170 ATM Workgroup Solutions: Implementing the 8285 ATM Switch