Filter
Top Products
This soft copy for use by IBM employees only.
″The backward Quality Of Service requested for this
call.″
::= { atmSvcLogEntry 9}
atmSvcLogForwardBW OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The forward bandwidth requested for this
call.″
::= { atmSvcLogEntry 10}
atmSvcLogBackwardBW OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The backward bandwidth requested for this
call.″
::= { atmSvcLogEntry 11}
-- SAAL Group
-- This group defines support for the SAAL protocol.
atmSaal OBJECT IDENTIFIER ::= { atmSvc 2 }
-- This table defines the SAAL configuration and status.
atmSaalConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmSaalConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″This table contains basic information on the SAAL protocol
for each signalling link defined per port.
Usually, there is only one signalling channel per interface
and thus one SAAL protocol definition entry per interface.″
::= { atmSaal 1 }
atmSaalConfEntry OBJECT-TYPE
SYNTAX AtmSaalConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″Entries of atmSaalConfTable. Each entry corresponds to a pair
of ATM interface, signalling channel.
A signalling channel is uniquely defined on each interface
by the VPI and VCI values allocated to it.″
INDEX { atmSaalConfIndex,
atmSaalConfSiVpi,
atmSaalConfSiVci }
::= { atmSaalConfTable 1 }
AtmSaalConfEntry ::= SEQUENCE {
atmSaalConfIndex
INTEGER,
atmSaalConfSiVpi
INTEGER,
Appendix E. IBM ATM Campus Switch Private MIBs 239