Filter
Top Products
This soft copy for use by IBM employees only.
•
All the commands can be abnormally terminated by pressing the Ctrl and C
keys simultaneously.
The following table is a quick reference to the procedures required to configure
the ATM subsystem of the 8285. Some of them are mandatory; others are
recommended.
Table 37. 8285 Configurations SET Commands Quick Reference List
Procedure 8285 Commands
Configure user and administrator passwords SET DEVICE PASSWORD
Configure 8285 terminal settings SET TERMINAL BAUD
SET TERMINAL DATA_BITS
SET TERMINAL PARITY
SET TERMINAL STOP_BITS
SET TERMINAL PROMPT
SET TERMINAL TIME_OUT
SET TERMINAL HANGUP
SET TERMINAL CONSOLE_PORT_PROTOCOL
Configure 8285 device configuration SET CLOCK
SET DEVICE NAME
SET DEVICE LOCATION
SET DEVICE CONTACT
SET DEVICE DIAGNOSTICS
Configure 8285 ATM address SET DEVICE ATM_ADDRESS
Configure Classical IP parameters for 8285 SET DEVICE IP_ADDRESS
SET DEVICE DEFAULT_GATEWAY
SET DEVICE ARP_SERVER
Configure LEC IP parameters for 8285 SET DEVICE LAN_EMULATION_CLIENT
Configure SLIP parameters for 8285 SET TERMINAL CONSOLE_PORT_PROTOCOL
SET TERMINAL SLIP_ADDRESS
SET TERMINAL BAUD
Configure LE server parameters (LECS and
LES/BUS) for 8285
SET LAN_EMUL CONFIGURATION_SERVER
SET LAN_EMUL SERVER
Configure SNMP parameters for 8285 SET COMMUNITY
SET ALERT
Configure ATM media modules SET MODULE
Configure ATM ports SET PORT
Configure NNI connection between Hubs SET LOGICAL_LINK
Configure NNI connections ATM subnetworks SET STATIC_ROUTE
Configure ESI for ATM stations SET ATM_ESI
Configure PVCs and PVPs SET PVC
Configure TFTP parameters for download/upload SET TFTP FILE_NAME
SET TFTP FILE_TYPE
SET TFTP SERVER_IP_ADDRESS
SET TFTP TARGET_MODULE
Configure trace/dump facilities SET TRACE
172 ATM Workgroup Solutions: Implementing the 8285 ATM Switch