Filter
Top Products
This soft copy for use by IBM employees only.
in a lesLecEntry associated to the given lesIndex.
The lesLecEntry is defined in the lesMIB.″
::= { lesConfEntry 3 }
-- ====================================================================
-- Traps
-- ====================================================================
hello TRAP-TYPE
ENTERPRISE node
VARIABLES { sysObjectID, ifPhysAddress }
DESCRIPTION
″ A hello trap is sent:
- when the system re-initializes: it is sent every minutes until
an SNMP request is received or until 255 minutes have passed.
- when one of the following parameters is changed:
-- agent IP address(es)
-- agent subnet mask(s)
-- ATM address of the IP ARP server
-- IP address of the default gateway
The value of ifPhysAddress is the ATM address of the hub.
The hello trap may be disabled.″
::= 1
lock TRAP-TYPE
ENTERPRISE node
VARIABLES { moduleSlotIndex }
DESCRIPTION
″ A lock trap is sent when a set request is rejected because it is
suspected that this may cause to break the link between the agent
and the manager. This may occur when:
- isolating a slot
- disabling a port
if the request is received through this specific port/module/slot.″
::= 2
change TRAP-TYPE
ENTERPRISE node
VARIABLES { moduleSlotIndex, ifIndex }
DESCRIPTION
″ A change trap is sent when one of the following MIB variables or
group of variables is changed:
- Date and Time reset
- System Parameters (name, contact, location) changed
- Interface changed:
-- Administrative State (enabled/disabled)
- Module changed:
-- Administrative State (isolate/attach)
When one of this variable is changed, the lastChange MIB object is
also updated with the current date and time.
When the Date and Time or the System Parameters changed,
the interface number of the hub virtual interface is returned.
This trap may be disabled.″
::= 3
pvcFailure TRAP-TYPE
ENTERPRISE node
VARIABLES { atmPvcIndex, atmPvcIdentifier, atmPvcEpQ2931Cause }
254 ATM Workgroup Solutions: Implementing the 8285 ATM Switch