Filter
Top Products
This soft copy for use by IBM employees only.
atmQ2931StatsVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The Vpi value which, with the Vci value specified in
atmQ2931StatsVci, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.″
::= { atmQ2931StatsEntry 2 }
atmQ2931StatsVci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The Vci value which, with the Vpi value specified in
atmQ2931StatsVpi, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.″
::= { atmQ2931StatsEntry 3 }
atmQ2931OutCallAttempts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″This is the number of outgoing call attempts on this
interface, including accepted as well as rejected calls.″
::= { atmQ2931StatsEntry 4 }
atmQ2931OutCallInProgress OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
″This is the current number of outgoing calls in progress
on this interface.″
::= { atmQ2931StatsEntry 5 }
atmQ2931OutCallFailures OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″This is the number of outgoing calls that were cleared
for a reason other than a DTE or operator initiated action.″
::= { atmQ2931StatsEntry 6 }
atmQ2931InCallAttempts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″This is the number of incoming call attempts on this
interface, including accepted as well as rejected calls.″
::= { atmQ2931StatsEntry 7 }
232 ATM Workgroup Solutions: Implementing the 8285 ATM Switch