Filter
Top Products
This soft copy for use by IBM employees only.
″The ifindex value used at the remote end to identify the
interface where the PVC ends.
This entry will remain in the notReady state until this
attribute is set (and the atmPvcRowStatus is set to active).″
::= { atmPvcEpEntry 7 }
atmPvcEpRemVpi OBJECT-TYPE
SYNTAX INTEGER (0..65536)
ACCESS read-write
STATUS mandatory
DESCRIPTION
″The VPI value assigned to this PVC at the destination
(remote end).
If left at 65536 (default value), one value is
automatically allocated by the agent.″
DEFVAL { 65536 }
::= { atmPvcEpEntry 8 }
atmPvcEpRemVci OBJECT-TYPE
SYNTAX INTEGER (0..65536)
ACCESS read-write
STATUS mandatory
DESCRIPTION
″The VCI value assigned to this PVC at the destination.
For VP-type PVC, this value is not applicable and is
set to 0.
If left at 65536 (default value), one value is
automatically allocated by the agent (for VC only).″
DEFVAL { 65536 }
::= { atmPvcEpEntry 9 }
atmPvcEpLastActive OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The date and time of the latest PVC activation.″
::= { atmPvcEpEntry 10}
atmPvcEpQ2931Cause OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The cause of the failure as defined by Q2931.″
::= { atmPvcEpEntry 11}
atmPvcEpFailures OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The number of times this PVC failed.″
::= { atmPvcEpEntry 12 }
-- The group atmLanEmulation defines the specific support for
-- the lan emulation resources in the atm node
252 ATM Workgroup Solutions: Implementing the 8285 ATM Switch