Filter
Top Products
This soft copy for use by IBM employees only.
ocPowerModeOperStatus OBJECT-TYPE
SYNTAX INTEGER {
fault-tolerant(1),
not-fault-tolerant(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The current operational status of hub power fault-tolerant
mode.″
::= { ocPowerControl 2 }
ocPowerOverheatPowerDownMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The current desired state of hub overheat automatic power-
down mode. The value enable(1) causes slots containing IBM 8260
modules to be automatically power-disabled during a hub
overheat condition. The value disable(2) causes no action
to be taken when a hub overheat condition occurs.″
::= { ocPowerControl 3 }
--
-- Hub backplane power
--
ocPowerOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF OcPowerOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″A table that contains information about the hub power
budget. This table is indexed by voltage line type, each
of which is supplied by the operational power supplies.″
::= { ocPower 2 }
ocPowerOutputEntry OBJECT-TYPE
SYNTAX OcPowerOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″A list of information about the hub power budget.″
INDEX { ocPowerOutputType }
::= { ocPowerOutputTable 1 }
OcPowerOutputEntry ::=
SEQUENCE {
ocPowerOutputType
INTEGER,
ocPowerOutputVoltageLevel
Gauge,
ocPowerOutputWattageCapacity
Gauge,
ocPowerOutputWattageConsumed
Gauge,
266 ATM Workgroup Solutions: Implementing the 8285 ATM Switch